Preventative Care


The following is a recommended, scheduled system maintenance checklist for Keiser Strength, and M Series Cardio equipment. If you are unsure how to perform any of the below operations, please reference the complete equipment manual specific to your line of equipment found here, or contact our service department for assistance.


Strength Equipment

  

M Series Cardio
After Every Class
- Have Members Thouroughly Inspect each Cycle/Strider
- Have Members wipe off ALL SWEAT

Weekly For the First Month
- Check and Re-Tourque Crank Arms and Pedals

Weekly
- Thouroughly Inspect each Cycle/Strider
- Clean the Cycle/Strider with warm water, and a soft lint free cloth
- Inspect the Computers for Low Battery Indication

Monthly
- Check and Re-Tourque Crank Arms and Pedals
- Wax areas of Cycles/Striders that come into most contact with sweat
- Lubricate T-Handle Adjustment Threads
Daily
- Clean Chrome and Paint where applicable
- Clean Upholstery

Weekly
- Wax Chrome and Paint where applicable
- Wax Upholstery
- Inspect Belts
- Wash Hand Grips
- Inspect Air Line Filters

Monthly
- Inspect all Nuts and Bolts
- Clean and Lubricate Cylinder Rods
- Inspect Frame for any weakening in weld areas,
and other connection sites

Quarterly
- Lubricate Pivot Bushings
- Inspect Exhaust Mufflers for Discoloration
- Verify the Compressor(s) is cycling on/off between 100-120 psi

Annually
- Replace Display Batteries

Select your market